Tianjin Huaqian Building Materials Co., Ltd.

Tile adhesive is also called tile adhesive. This product is divided into three types: ordinary tile type, vitrified tile type, and marble type.
'
'
'
'
.. Used for pasting indoor and outdoor ceramic wall and floor tiles and ceramic mosaics. It is also suitable for the waterproof layer of internal and external walls, pools, kitchens and bathrooms, basements, etc. of various buildings. Used for pasting ceramic tiles on the protective layer of external thermal insulation systems.
/
All base surfaces should be solid, dry, clean, non-shaking, free of oil stains, wax stains, concrete curing agents and Other loose materials.
The painted base surface should be roughened, exposing at least
%
The new concrete base surface should be cured at least
The new plastered base surface should be cured at least
Old concrete or plaster base surfaces can be cleaned with industrial detergents or degreasing agents, and then rinsed with a high-pressure faucet. The surface can be laid after it is dry
Remove any residue from the concrete surface, especially the release agent remaining on the sloped concrete slab.
On substrates with high water absorption or in high temperature and dry environments, the base surface must be moistened before construction.
When stirring, add water first and then pour the tile adhesive. Use an electric mixer to stir the water and tile adhesive into a uniform paste. Leave to stand
Stir again and use.
If the weight of the tile adhesive stirred at one time is less than
<
Use a toothed scraper to apply the mixed tile cement to the work surface so that it is evenly distributed and formed into a tooth shape. The coating area is about
(
)
When selecting the size of the toothed scraper, the flatness of the working surface and the unevenness of the back of the tile should be considered.
If the gap on the back of the tile is deep or the stone or tile is large and heavy, the construction should be carried out by applying tile cement on the working surface and the back of the tile at the same time.
The construction temperature is
< ℃ ℃
It is best to use an electric mixer to stir. Stirring again after letting it stand will help increase the cohesion.
The ratio of tile adhesive to water can be adjusted appropriately depending on the substrate, weather, construction conditions, etc.
During construction on rainy days, protective measures must be taken to cover and ensure that the
construction area after tiling is not wetted by rainwater.
The prepared tile cement should be used up within
~
Do not mix dry tile cement with water before use.
After the tile laying is completed, the tile cement must be completely dry (approximately
before proceeding to the next step of filling.
The tile cement should be applied evenly and fully, and the adhesive layer The thickness should be about half the tooth pitch of the toothed scraper used.
This product is divided into ordinary ceramic tile type, vitrified tile type, and marble type. Choose the corresponding model according to the ceramic tile for the best sticking effect.
Tile bonding